2020. 3. 3. 04:57ㆍ카테고리 없음
UV5R TONE SCAN - Mikloroutdoors hunting camping SHTF GMRS radio communications antenna battery electronicsscanners digital computer software hardware laptop iPad iPhone eBay music radio.Scanning for CTCSS and DCS Tones/CodesNote 1: Scanning for a CTCSS tone or DCS code can be done whileeither the Frequency Mode(VFO) or Channel Mode (MR) is selected. Only when VFO mode is selected, can thedetected tone/code be saved to menu 11/10.Note 2: CTCSS tone and DCS code scanning option can be accessed with or without asignal being present. However, the scanning process itself ONLY OCCURS while a signal isbeing received.Note 3: Not all repeaters requiring a CTCSS tone or DCS code for access willtransmit one back. In that case, the transmitter of a station that can accessthe repeater would need to be scanned. In other words, this would be done bylistening to stations on the repeater's input frequency.Scanning for CTCSS Tonetap MENU (enters MENU mode)key in 1 1 (selects menu 11 R-CTCS)tap MENU (enters menu 11 R-CTCS entry mode)tap.SCAN (CTCSS scanning will begin)A flashing 'CT' will be in the left status display to indicate the radio is inCTCSS scanning mode.
Ctcss Decoder Software Download
Ctcss Decoder Software Windows 7
In this mode, whenever the radio is receiving a signalon the selected MR channel or VFO frequency, the lower display will cyclethrough the CTCSS tones as they are being tested. Once the frequency of thereceived CTCSS tone is determined, the 'CT' indicator will stop flashing.tap MENU (saves tone into menu 11 VFO mode only)tap EXIT (exits MENU mode)Don't forget to set VFO menu 11 back to OFF when the CTCSS tone is no longerrequired.Scanning for a DCS tonetap MENU (enters MENU mode)key in 1 0 (selects menu 10 R-DCS)tap MENU (enters menu 10 R-DCS entry mode)tap.SCAN (DCS scanning will begin)A flashing 'DCS' will be in the left status display to indicate the radio is inDCS scanning mode. In this mode, whenever the radio is receiving an RF signalon the selected MR channel or VFO frequency, the lower display will cyclethrough the DCS codes as they are being tested. Once the bits of the receivedDCS code are determined, the 'DCS' indicator will stop flashing.tap MENU (saves tone into menu 10 VFO mode only)tap EXIT (exits MENU mode)Don't forget to set VFO menu 10 back to OFF when the DCS code is no longerrequired.My thanks to Jim, KC9HI for the above examples..